Contact Us

Contact: Toby

Mob: +8618921102679

TEL: +86-510-83394067
Fax: +86-510-83383382
E-mail: kdsales@wxkdyr.com
Address:No.18 Yanyu Road, Qianzhou Town, Huishan District, Wuxi City, Jiangsu Province, China

Home > News > Content
Operating Procedures For Cleaning Machines
Jan 30, 2018

Prepare for the Prelude

A, check the pipeline system has no leakage leakage situation, if this situation, should inform maintenance personnel repair.

b, check whether the cleaning fluid is sufficient, if not enough, in time to increase the cleaning fluid.

C, start the test, and then empty for 2-3 minutes, check the transmission system (motor, coupling, reducer) and transport belt movement is smooth, confirm all normal, before production.

D, open the oil removal device (excluding the oil slick excluding devices) began to remove oil, so the water pump is still open, water calm, the best drain oil, to be eliminated after the basic removal of oily sludge, oil pollution, the use of lunch time.

Operational matters

A, the cleaned parts should be neatly placed on the transport belt, do not press on the wheel;

b, in the transport belt, the cleaned parts can not heap too much, so as not to affect the cleaning effect.

C, after work, the cleaned parts can not be parked on the transport belt, press the Stop button, so that the whole machine to stop running.

Washing machine cleaning Machine use different methods to clean packaging containers, packaging materials, packaging aids, packaging, to achieve the desired cleanliness of the machine.

D, cleaning liquid should be regularly added water and a certain proportion of metal cleaning agent to supplement consumption, so that the liquid level to maintain a certain height, if the cleaning effect does not reach the required technical requirements, should replace the cleaning solution.