Contact Us

Contact: Toby

Mob: +8618921102679

TEL: +86-510-83394067
Fax: +86-510-83383382
E-mail: kdsales@wxkdyr.com
Address:No.18 Yanyu Road, Qianzhou Town, Huishan District, Wuxi City, Jiangsu Province, China

High Temperature Gauze Scouring And Bleaching Machine

KD202-1000 Type high temperature gauze scouring and bleaching machine is developed on the basis of the experience of dyeing warp yarns and fabrics, and is specially designed for the scouring and bleaching of medical gauze.

图片26.jpg

KD202-1000 Type high temperature gauze scouring and bleaching machine is developed on the basis of the experience of dyeing warp yarns and fabrics, and is specially designed for the scouring and bleaching of medical gauze.

Scouring and bleaching are absolutely necessary process in cotton hemp dyeing and finishing technique.  High temperature gauze scouring and bleaching machine is an ideal machine. This scouring and bleaching machine can be used for wipe off cottonseed shell, the commensal of cellulose and oil smear. Thus fabric is provided with outstanding appearance and excellent absorbency. It is in favor of the following process. This machine also can be used for bleaching and washing the fabric of cotton, wipe off remain impurity and crude pigment. The degree of whiteness and osmosis is enhanced.

This gauze scouring and bleaching machine adopts single inner pendulum structure to meet the requirement of the process.


Main Technical Parameters

1. Machine type:  Vertical cylinder liquid-flow type

2. Max. Working capacity : 1 T

3. Normal temperature:  98℃ .High temperature: 120~130℃

4. Working pressure: ≤0.25Mpa

5. Liquor ration: 1:6~1:10.

6. Liquor circulation method: to make liquid circle by means of drive centrifugal pump, take the commutator to shift liquid direction.

7. Heating method: tubular heater

8. Gauze cage: each machine has 2 cages.

9. Quantity of warp beam: 4pcs.

10. Winding diameter of warp beam: 700mm

11. Open and close groove cover: manually, balanced by drag weight.


Standard Structure and Features

1. Main material: All of the wetted parts adopted 1Cri18Ni9Ti or SVS316 high quality stainless steel.图片27.jpg

2. The diameter of main cylinder: 2000mm The thickness of board: 8mm.

3. The capacity of accessorial vat must as same as main cylinder. The thickness of board: 4mm.

4. Microprocessor control performs multifunction operation: water intake and drainage、inner and external flow.

5. Water intake and drainage will be programmed to shorten the process time.

6. Overflow washing system realize thoroughly cleanness.

7. Upstanding impression thanks to the fluently fluid flow and high exchange rate.

8. Transducer control main pump motor in order to provide step less flux control, it will save the energy -consuming.

9. Set up high-efficiency stainless steel pump and mechanical sealed device, main pump adopts ‘RUIXIANG’ water pump which import from Taiwan.

10. Employ safety interlock and balanced drag weight device for vat cover.

11. Adopt multifunction fluid commutator.

12. Equip with high-efficiency external heat exchanger.


Maintenance of High Temperature Gauze Scouring And Bleaching Machine

1. Most parts of machine made of stainless steel, has surface passivation treatment. So it should be avoid brushing by steel brush and do not hammer all of stainless steel parts when install and remove it in order to avoid damage of their surface.

2. To avoid collide and scrub when suspend or take the machine.

3. Do not wet the motor.

4. Check the safety valve and interlock device regularly, at least one time per one quarter.

5. Check manometer and resistance thermometer, at least one time per one quarter.

6. Perform the operation and management refers to <Pressure vessel safety supervise regulations >

7. Make sure reliable earthing about electric box and motor.

8. Put moisture absorption dose in electric box; prohibit opening cover in machining process.

9. Exhaust the fluid and turn off power supply when replacing mechanical seal. Press out the moving hoop then release, the moving hoop will be bounce freely, otherwise it need to install again. Keep the level when install passive hoop.

10. Check manometer and thermal resistance thermometer, at least one time per one quarter.


Hot Tags: high temperature gauze scouring and bleaching machine, manufacturers, suppliers, factory, buy, price, customized, for sale
Inquiry